Iron Filter Includes:

• Fleck 7000 115v control valve
• ¾” or 1” pipe connectors with bypass valve
• 1.0 Cubic foot of Birm filter media

Specifications:

• All the filter media you need for the system is included.
• Birm iron filters are an efficient and economical method of removing dissolved iron compounds from well waters under the right conditions.
• No chemicals are required for regeneration of the filter media backwash and cleaning is accomplished with raw water.
• No chlorine hydrogen sulfide gas or tannins should be present in the raw water.
• For manganese removal Birm works only if the pH is over 8.2.
• Sufficient dissolved oxygen must be present for Birm to work properly so typically an air injection system is used or the filters are used after holding tanks.
• Filter tank is NSF certified one piece seamless polyester construction for long life.
• Max pressure recommended is 100 psi.
• Maximum water temperature recommended 100F.
• Advanced Fleck 7000 electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features.
• Reliable electronic control provides quick setup and easy programming.
• Quick-connect clips allow easy installation and maintenance.
• Non-corrosive high-tech material construction.
• High flow bypass valve included.
• Environmental cover (NEMA-3R rated) protects control from the weather can be installed inside or outside if protected from freezing.
• Full-port bypass valve provides high flow with very little pressure drop.
• The recommended maximum flow rate for best filtration performance is 5.0 gallons per minute but peak flow rates for several minutes of 15 to 20 gallons per minute are possible.
• The backwash flow rate is 5.0 gallons per minute.

Dimensions:

• Filter tank diameter: 10 inches
• Height including control valve 50.5 inches