Birm Iron Filter 7000: 2.5 CF 1in 115V : Clean Water Store

Sign In

Product Links
City Water Systems
Well Water Systems
  Acid Neutralizer Filters
  Arsenic Filters
  Bacteria Disinfection
  Chlorination Systems
  Corrosion Control
  Distillers
  Filters & Strainers
  Iron & Manganese Filters
    Birm Filters
      Economy Birm 5600
      Heavy-Duty Birm 2510
      Electronic Birm 7000
      Stainless Steel Birm
    Greensand Filters
    Pyrolox Iron Filters
    Greensand Plus Filters
    Terminator Iron Filter
    Terminator Iron Filter Plus
  Metering Pumps & Parts
  Nitrate Filters
  Odor - Aeration Tanks
  Ozone Systems
  Phosphate Systems
  RO High Flow
  RO Under-Sink
  Sediment Filters
  Softeners
  Soda Ash Systems
  Tannin Filters
  Ultraviolet Sterilizers
Travel & Emergency Purifiers
Filter Cartridges
Filter Tanks & Housings
Filter Media, Chemicals, Control Valves, Parts
Commercial Systems
Water Testing

Water Problem Links
How-To Guides
Frequently Asked Questions
Manuals & Guides

Our 21st year in the water business!

WQA Certified Technicians are here to assist you!
1-831-462-8500

Members of:

Home > Well Water Systems > Iron & Manganese Filters > Birm Filters > Electronic Birm 7000 > Birm Iron Filter 7000: 2.5 CF 1in 115V

Birm Iron Filter 7000: 2.5 CF 1in 115V

Quantity in Basket: None
Code: FE008020
List Price: $1089
Price: $689.00
Shipping Weight: 195.00 lbs.

Birm 7000 Iron Filter: includes 1 inch by-pass valve; 2.5 cubic feet of Birm iron filter media; and Fleck 7000 115v control valve. All the filter media you need for the system is included. Birm iron filters are an efficient and economical method of removing dissolved iron compounds from well waters under the right conditions. No chemicals are required for regeneration of the filter media backwash and cleaning is accomplished with raw water. No chlorine hydrogen sulfide gas or tannins should be present in the raw water. For manganese removal Birm works only if the pH is over 8.2. Sufficient dissolved oxygen must be present for Birm to work properly so typically an air injection system is used or the filters are used after holding tanks. Filter tank is NSF certified one piece seamless polyester construction for long life. Max pressure recommended is 100 psi. Maximum water temperature recommended 100F. Advanced Fleck 7000 electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features. Reliable electronic control provides quick setup and easy programming. Quick-connect clips allow easy installation and maintenance. Non-corrosive high-tech material construction. High flow bypass valve included. Environmental cover (NEMA-3R rated) protects control from the weather can be installed inside or outside if protected from freezing. 35 gallons per minute maximum flow rate and full-port bypass valve provides high flow with very little pressure drop. The recommended flow rate for maximum filtration performance is 8.0 gallons per minute but peak flow rates of 20 gallons per minute are possible. The backwash flow rate is 10.0 gallons per minute. Dimensions: filter tank diameter: 13 inches; height including control valve: 61 inches.

Clean Water Systems & Stores, Inc. 2806-C Soquel Ave, Santa Cruz, California 95062
Phone: 831-462-8500 Fax: 831-476-0832
Call us Mon. - Fri. 10AM - 8PM Eastern Time or 7AM - 5PM Pacific Time!

We ship from our warehouse in Ohio for fast Midwest & East Coast service.
For West and Southwest orders, we ship from our warehouses in California or Arizona.

©Copyright 1997-2008 Clean Water Systems & Stores, Inc., All Rights Reserved

Ecommerce Shopping Cart Software by Miva Merchant