|
|
Home
> Well Water Systems
> Iron & Manganese Filters
> Pyrolox Iron Filters
> Stainless Steel
> Pyrolox Iron Filter 7000-SS: 2.5 CF 1in 115V
| Pyrolox Iron Filter 7000-SS: 2.5 CF 1in 115V
|
|
|
Quantity in Basket:
None
Code: FE008250
List Price: $2199
Price: $1,699.00
Shipping Weight: 415.00 lbs.
|
Pyrolox 7000 Stainless Steel Iron Filter: includes 1 inch by-pass valve; 2.5 cubic feet of Pyrolox iron filter media; and Fleck 7000 115v control valve. All the filter media you need for the system is included. Pyrolox filters remove iron manganese and hydrogen sulfide from well waters without the use of chemical additives. Pyrolox has a very heavy weight compared to Birm or greensand media and there must be sufficient backwash flow rate available to properly clean the filter media. The Pyrolox media is very durable has long service life and low annual attrition of the filter bed. Chlorine ozone or hydrogen peroxide can be fed ahead of the iron filter. Filter tank is industrial quality heavy-duty robot-welded 316 stainless steel for exceptional long life. Max pressure recommended is 100 psi. Maximum water temperature recommended is 100F. Advanced Fleck 7000 electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features. Reliable electronic control provides quick setup and easy programming. Quick-connect clips allow easy installation and maintenance. Non-corrosive high-tech material construction. High flow bypass valve included. Environmental cover (NEMA-3R rated) protects control from the weather can be installed inside or outside if protected from freezing. The recommended flow rate for maximum filtration performance is 8.0 gallons per minute but peak flow rates of 20 gallons per minute are possible. The backwash flow rate is 25.0 gallons per minute. Dimensions: filter tank diameter: 13 inches; height including control valve: 61 inches.
|
|
|
