Iron Filter Includes:

• Fleck 7000 115v control valve
• 1” bypass valve
• 14x65” filter tank
• 3.0 Cubic foot of Greensand-Plus filter media
• potassium permanganate solution tank

Specifications:

• Potassium permanganate is not included, purchase separately.
• All the filter media you need for the system is included.
• Greensand iron filters are an excellent method of removing high levels of iron manganese and hydrogen sulfide from well waters. Iron and manganese are oxidized and precipitated instantly by contact with the greensand media.
• The system automatically backwashes and cleans the greensand filter media using potassium permanganate which is easily added on a regular basis to the potassium permanganate solution tank.
• Raw water pH should be 6.8 or greater for best performance although it will work down to a pH of 6.5.
• Chlorine can be fed ahead of the iron filter to increase performance.
• Filter tank is NSF certified one piece seamless polyester construction for long life.
• Max pressure recommended is 100 psi.
• Maximum water temperature recommended 100F.
• Advanced Fleck 7000 electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features.
• Reliable electronic control provides quick setup and easy programming.
• Quick-connect clips allow easy installation and maintenance.
• Non-corrosive high-tech material construction.
• High flow bypass valve included.
• Environmental cover (NEMA-3R rated) protects control from the weather can be installed inside or outside if protected from freezing.
• Full-port bypass valve provides high flow with very little pressure drop.
• The recommended maximum flow rate for best filtration performance is 8.0 gallons per minute but peak flow rates of 20 gallons per minute are possible.
• The backwash flow rate is 10.0 gallons per minute.

Dimensions:

• Filter tank is 14 inches in diameter x 69 inches in height including control valve
• Potassium permanganate solution tank is 10.5 inches in diameter x 16 inches in height