Iron Filter Includes:

• Fleck 2510 115v control valve
• ¾ or 1” pipe connectors with bypass valve
• 12x52” filter tank
• 2.0 Cubic foot of Greensand-Plus filter media

Specifications:

• All the filter media you need for the system is included.
• Greensand iron filters are an excellent method of removing high levels of iron manganese and hydrogen sulfide from well waters.
• Iron and manganese are oxidized and precipitated instantly by contact with the greensand media.
• No permanganate tank included.
• Use with pre-chlorinated water only.
• Raw water pH should be 6.8 or greater for best performance although it will work down to a pH of 6.5.
• Chlorine can be fed ahead of the iron filter to increase performance.
• Filter tank is NSF certified one piece seamless polyester construction for long life.
• Max pressure recommended is 100 psi.
• Maximum water temperature recommended 100F.
• Rugged heavy-duty Fleck 2510 backwash control valve features fully adjustable backwash and rinse cycles saving water and allowing maximized performance.
• Time-tested hydraulically balanced piston seal and spacers provide years of trouble-free service. Non-corrosive high-tech material construction.
• 12-day time clock can be programmed so the filter backwashes at any time of the day at intervals of every 1, 2, 3, 4, 6 or 12 days.
• The recommended maximum flow rate for best filtration performance is 5.0 gallons per minute but peak flow rates of 18 gallons per minute are possible.
• The backwash flow rate is 5.0 gallons per minute.

Dimensions:

• Filter tank is 12 inches in diameter x 61 inches in height including control valve