Specifications:

• Wingert Centrifugal Sand & Solids Separator XTI series 2 inch pipe thread; for flows 90 - 157 gallons per minute; size is 10 x 34 inches; weight is 42 pounds.
• Drain size is 1-1/2 inch.
• Maximum pressure is 150 PSI; maximum temperature is 200F.
• These sand separators remove particles by centrifugal force.
• When the water passes through the separator sand debris and sludge is forced outward to the separator wall and downward pass the spin trap plate into the solids holding chamber.
• The Wingert separator has no screens; solid baffles; or moving parts.
• No maintenance is required other than periodic purging of the unwanted solids by opening up bottom ball valve (valve not included).
• Wingert separators can remove up to 98% of particles that are 40 microns and up.
• Pressure drop through separator is minimal and at the maximum flow rate is 4 PSI.