SandMaster H20-20  20-32 GPM 1"

SandMaster H20-20 20-32 GPM 1"

Code: FS001220 List Price: $829.00 Your Price: Shipping Weight: 13.00 lbs. Manufacturer: Claude Laval Corp Manufacturer#: H20-20
Not Yet Rated | Write the First Review

Choose your options:

Download SandMaster Brochure

SandMaster Mounting Kit Options:

SS-Auto-Flush-Kit:

Questions? Get a Fast Answer to your water treatment problems, click here!

Lakos SandMaster 1" NPT CS: 20-32 GPM: NSF certified carbon steel body. Lakos SandMasters are the best centrifigual separator for home and commercial well water systems, especially when the water is being used for potable or domestic use. NSF Certified as low lead product and compliant with Californias drinking water standard. Lakos SandMasters are ideal for removing sand and grit from well water systems without filter cartridges.

The sand separator works on a the principle of centrifugal force removing over 98% of all 200 mesh sized particles (74 microns) and greater. No moving parts to wear out, no screens, cartridges, cones or filter elements to clean or replace. The separator must be periodically purged, which is best done while the system is in operation and the water is flowing.

Order optional manual or automatic purge kits and mounting brackets separately. Operates with no downtime and purging can take place while the well water is being used. Maximum line pressure allowed 100 PSI. Maximum temperature 120F. Pressure loss at maximum flow rate is 12 PSI. Purge size outlet is 3/4" NPT, male. Must be installed between pump and pressure tank.

Mesh Size Selection Guide
A general guide for some common uses for the Twist II Clean

Materials In Water Systems To Protect Recommended
Mesh Size
Micron Rating Filters Particles
Down To

In general, use the coarsest mesh deemed acceptable to filter the materials you want to remove. This will help to extend the life of your system and reduce how often the filter requires cleaning.
Debris General use #30 600 micron 0.024"
Pipe scale, coarse sand Sprinkler systems, faucet aerators, sand sensitive valves #60 250 micron 0.010"
Fine sand, grit from new wells Poultry growers, watering devices #100 150 micron 0.006"
Drip irrigation systems, faucet aerators, sand sensitive valves #140 105 micron 0.004"
Fogger nozzles #140 105 micron 0.004"
Very fine sand and grit Pre-treatment #200 75 micron 0.003"


Choose Between CS (carbon steel painted series) or SS (stainless steel series)


sandmaster centrifugal separator
SandMaster - Your First Line of Defense Against Sand and Grit

Lakos SandMasters are the best centrifigual separator for home and commercial well water systems, especially when the water is being used for potable or domestic use. The SandMaster centrifigal separators have no screens, solid baffles, or moving parts. No maintenance is required other than periodic purging of the unwanted solids by opening up bottom ball valve (valve not included).
 
 
  • Clean Water Systems & Stores, Inc., Water Treatment Equipment,Service & Supplies, Santa Cruz, CA