Specifications:

• Media: Chem-Sorb Filter Granules, 1 Cu Ft Box: Chemsorb is an excellent alternative to filter sand and anthracite and is able to filter out finer particles from water.
• The alumino-silicate, crystal, mineral material (sometimes referred to as 'clinoptilolite has surface micro-mineral projections with 0.25 to 10 mm spacing that effectively trap suspended solids in waterstreams.
• The surface, micro-projections, together with the high surface area makes this material an ideal, water filtration media.
• This creates a surface area over 100 times greater than filter sand.
• The material is mined, crushed, dried and double-screen, sized to produce a high quality filter media with Uniformity Coefficient (D60/D10) of 1.7 having high through-put capacity at low differential pressure.
• High purity, low sodium, natural, zeolite, mineral (14” x 40”mesh) that is classified as GRAS (Generally Recognized AsSafe) under 21CFR Part 182.2729 and 40 CFR Part 180.1001 with ANSI/NSF Standard 61 Listing.
• The material is mineralogically and thermally stabile to 500° C.
• Advantages of ChemSorb®Filter Granules versus conventional sand, anthracite and mul-timedia filter media are below.
• Higher filtration capacity without additional capital costs.
• Reduced backwash frequency reduces costs and saveslabor.
• High flow rate capacity - gravity flow (4 gpm/ft2) and pressure vessels (12-18 gpm/ft2).
• Linear/near linear, head loss curve with superior, depthremoval of suspended solids.
• Superior filtration rating (5 micron nominal) translates to enhanced water quality.