Nitrate Filter Includes:

• 3/4 inch or 1 inch pipe connectors and by-pass valve
• 2.5 x 2 (each tank 2.5 cubic foot) cubic foot high capacity nitrate selective anion nitrate resin with 80000 grain capacity each (each tank removes approximately 80000 grains of nitrate as CaCO4)
• Fleck 9100 115v control valve

Specifications:

• All the filter media you need for the system is included.
• Nitrate levels in excess of 2 to 4 ppm are often a result of fertilizer run-off from agricultural operations or from leaking septic tank systems.
• These automatic nitrate removal systems properly sized and maintained can reduce nitrate levels by 80%.
• In place of toxic chemicals these systems regenerate with common water softening salt.
• Sizing is important and a complete general mineral water analysis is recommended.
• Sulfates affect performance and it is important to know the sulfate levels in addition to the nitrate levels.
• Filter tank is NSF certified one piece seamless polyester construction for long life.
• Max pressure recommended is 100 psi.
• Maximum water temperature recommended 100F.
• Heavy duty Fleck 9100 twin-tank on-demand control valve perfect for light commercial or heavy-residential systems that require continuous nitrate-filtered water.
• Five cycle control delivers controlled upflow backwash downflow brining slow rinse and rapid rinse all with nitrate-filtered water.
• Very salt efficient because no reserve needs to be programmed with twin tanks the nitrate filter can start a regeneration immediately on demand.
• 7.0 gallons per minute recommended max. flow rate.
• Actual nitrate removal capacity depends on the total amount of nitrate and sulfates present in the water.
• For assistance in sizing or selecting a nitrate system please email us with water chemistry information.

Dimensions:

• Filter tank diameter: 13 inches
• Height including control valve: 61 inches
• Brine tank: 18 x 33 inches