|
|
Home
> Well Water Systems
> Sediment Filters
> Sediment Filter 7000-SS: 1.0 CF 3/4in 115v
| Sediment Filter 7000-SS: 1.0 CF 3/4in 115v
|
|
|
Quantity in Basket:
None
Code: SF001740
List Price: $1079
Price: $863.00
Shipping Weight: 115.00 lbs.
|
Sediment 7000 Stainless Steel Filter: includes 3/4 inch by-pass valve; 1.0 cubic foot of Sediment filter media; and Fleck 7000 115v control valve. All the filter media you need for the system is included. Excellent for use in filtering a wide range of colloidal and soluble inorganic contaminants and sediment. Works better than typical sand and anthracite filters uses less backwash water and allows reduced frequency between backwashes. Superior filtration down to 5 microns translates to enhanced water quality. Much longer life and higher flow rates than filter cartridges. Unlike filter cartridges which can trap sediment and dirt causing pressure drop these systems automatically backwash out trapped sediment alleviating pressure drop. High purity natural zeolite 14 x 40 inch mesh is NSF certified. Filter tank is industrial quality heavy-duty robot-welded 316 stainless steel for exceptional long life. Max pressure recommended is 100 psi. Maximum water temperature recommended is 100F. Advanced Fleck 7000 electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features. Reliable electronic control provides quick setup and easy programming. Quick-connect clips allow easy installation and maintenance. Non-corrosive high-tech material construction. High flow bypass valve included. Environmental cover (NEMA-3R rated) protects control from the weather can be installed inside or outside if protected from freezing. 35 gallons per minute maximum flow rate and full-port bypass valve provides high flow with very little pressure drop. The recommended flow rate for maximum filtration performance is 5.0 gallons per minute but peak flow rates up to gallons per minute are possible. The backwash flow rate is 7.0 gallons per minute. Dimensions: filter tank diameter: 10 inches; height including control valve: 50.5 inches.
|
|
|
