|
|
Home
> Well Water Systems
> Sediment Backwash Filters
> Sediment Filter WS1 2.5 CF
| Sediment Filter WS1 2.5 CF
|
|
|
Quantity in Basket:
None
Code: SF001890
List Price: $1498
Price: $749.00
Shipping Weight: 205.00 lbs.
|
Sediment WS1 Auto-Backwash Filter: includes 2.5 cubic feet of Chemsorb filter media, 13" x 54" filter tank, Clack WS1 control valve, and bypass valve with 1" pipe connectors. All the filter media you need for the system is included. Excellent for use in filtering a wide range of colloidal and soluble inorganic contaminants and sediment. Works better than typical sand and anthracite filters uses less backwash water and allows reduced frequency between backwashes. Superior filtration down to 5 microns translates to enhanced water quality. Much longer life and higher flow rates than filter cartridges. Unlike filter cartridges which can trap sediment and dirt causing pressure drop these systems automatically backwash out trapped sediment alleviating pressure drop. High purity natural zeolite 14 x 40 inch mesh is NSF certified. Filter tank is NSF certified one piece seamless polyester construction for long life. Max pressure recommended is 100 psi. Maximum water temperature recommended 100F. Professional quality Clack WS1 electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features. Reliable electronic control provides quick setup and easy programming. Quick-connect clips allow easy installation and maintenance. Non-corrosive high-tech material construction. High flow bypass valve included. Environmental cover (NEMA-3R rated) protects control from the weather can be installed inside or outside if protected from freezing. The recommended flow rate for maximum filtration performance is 18.0 gallons per minute but peak flow rates of 27 gallons per minute are possible. The backwash flow rate is 12.0 gallons per minute. Dimensions: filter tank diameter: 13 inches; height including control valve: 61-3/8 inches."
|
|
|
