|
|
Home
> Well Water Systems
> Tannin Filters
> Tannin Filter: 7000-Meter 2.5 CF 1in 115V
| Tannin Filter: 7000-Meter 2.5 CF 1in 115V
|
|
|
Quantity in Basket:
None
Code: T9000090
List Price: $3195
Price: $2,395.00
Shipping Weight: 223.00 lbs.
|
Tannin Filter: 7000-Meter 2.5 CF 1in 115V. These tannin filters use the high quality Purolite TanEx anion exchange resin filter media. This system automatically uses salt water to clean and restore the resin media. Salt is added periodically to the brine tank similar to a water softener. A wide range of tannins and humic acids are removed by the tannin filter which leaves the water free of color. Filter tank is NSF certified one piece seamless polyester construction for long life. Max pressure recommended is 100 psi. Maximum water temperature recommended 100F. Advanced Fleck 7000-Meter on-demand electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features. Precise electronic meter measure the amount of water used and regenerates the tannin filter based on actual water usage saving salt and water. Reliable electronic control provides quick setup and easy programming. Quick-connect clips allow easy installation and maintenance. Non-corrosive high-tech material construction. High flow bypass valve included. Environmental cover (NEMA-3R rated) protects control from the weather: can be installed inside or outside if protected from freezing. 35 gallons per minute maximum flow rate and full-port bypass valve provides high flow with very little pressure drop. 5.0 gallons per minute peak flow rate. By-pass valve included with1 inch FPT connection. Dimensions: filter tank diameter: 13 inches; height including control valve: 61 inches; brine tank: 18 in x 33 in.
|
|
|
