Includes:

• Tannin Filter 7000-Meter 2.5 CF 1in 115V

Specifications:

• These tannin filters use the high quality Purolite TanEx anion exchange resin filter media.
• This system automatically uses salt water to clean and restore the resin media.
• Salt is added periodically to the brine tank similar to a water softener.
• A wide range of tannins and humic acids are removed by the tannin filter which leaves the water free of color.
• Filter tank is NSF certified one piece seamless polyester construction for long life.
• Max pressure recommended is 100 psi.
• Maximum water temperature recommended 100F.
• Advanced Fleck 7000-Meter on-demand electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features.
• Precise electronic meter measure the amount of water used and regenerates the tannin filter based on actual water usage saving salt and water.
• Reliable electronic control provides quick setup and easy programming.
• Quick-connect clips allow easy installation and maintenance.
• Non-corrosive high-tech material construction.
• High flow bypass valve included.
• Environmental cover (NEMA-3R rated) protects control from the weather: can be installed inside or outside if protected from freezing.
• Maximum flow rate recommended for this size is 12 gallons per minute, although flow rates as high as 15 gallons is possible.
• By-pass valve included with 3/4 inch FPT connection.

Dimension:

• Filter tank diameter: 13 inches
• Height including control valve: 61 inches
• Brine tank: 18 in x 33 in.