Tannin Filter 7000-SXT 3.0 CF

Tannin Filter 7000-SXT 3.0 CF

Satisfaction Guaranteed! Free Shipping in Continental U.S.

Code: T9000220 List Price: $0.00 Your Price: Shipping Weight: 270.00 lbs. Manufacturer: CWS Manufacturer#: T9000220
Not Yet Rated | Write the First Review

Choose your options:



Pipe Connector Options:

Questions? Get a Fast Answer to your water treatment problems, click here!

Sizing Guide

Model Number of Bathrooms in Home Flow Rate Backwash Flow Rate Dimensions
1.0 CF 1 - 2 5 GPM 2.4 GPM Diameter: 10" Height: 44"
1.5 CF 1 - 2 7.5 GPM 2.4 GPM Diameter: 10" Height: 54"
2.0 CF 2 - 3 10 GPM 3.5 GPM Diameter: 12" Height: 52"
2.5 CF 2 - 4 12.5 GPM 4 GPM Diameter: 13" Height: 54"
3.0 CF 2 - 5 15 GPM 5 GPM Diameter: 14" Height: 65"


  • These tannin filters use the high quality Purolite TanEx anion exchange resin filter media.
  • This system automatically uses salt water to clean and restore the resin media.
  • Salt is added periodically to the brine tank similar to a water softener.
  • A wide range of tannins and humic acids are removed by the tannin filter which leaves the water free of color.
  • Filter tank is NSF certified one piece seamless polyester construction for long life.
  • Advanced Fleck 7000-Meter on-demand electronic backwash control valve features fully adjustable backwash and rinse cycles and is loaded with features.
  • Precise electronic meter measure the amount of water used and regenerates the tannin filter based on actual water usage saving salt and water.
  • Reliable electronic control provides quick setup and easy programming.
  • Quick-connect clips allow easy installation and maintenance.
  • Non-corrosive high-tech material construction.
  • Environmental cover (NEMA-3R rated) protects control from the weather: can be installed inside or outside if protected from freezing.


  • Tannin Filter 7000-Meter 3.0 CF in 115V
  • High flow bypass valve included.
  • By-pass valve included with 3/4 inch FPT connection.


  • Max pressure recommended is 100 psi.
  • Maximum water temperature recommended 100F.

Flow Rates

  • Recommended flow rate for maximum filtration performance: 9 gpm
  • The peak flow rate is: 15 gpm
  • The backwash flow rate: 5 gpm


  • Filter tank diameter: 14 inches
  • Filter tank height: 65 inches
  • Height including control valve: 72.5 inches
  • Brine tank: 18 in x 33 in.

A Few of Our Valued Commercial/Industrial Customers

  • Clean Water Systems & Stores, Inc., Water Treatment Equipment,Service & Supplies, Santa Cruz, CA