These standard soda ash injection systems work great to neutralize a very low pH in the range of 4.5 to 6.0. Safely raises the pH to the 7.0 to 8.0 range. Soda ash (sodium carbonate) is a powder that is mixed with water and injected into the water pipe before the pressure tank to raise the pH of water. By dissolving 2 to 3 lbs of soda per gallon of water and injecting this solution at a rate of 100 ppm to 200 ppm, the pH will rise to the 7.0—8.0 range, assuming a typical well water flow rate of 5 to 30 gallons per minute.

Our standard soda ash pump is the 85MHP40 which can pump 40 gallons of solution in 24 hours of the well pump running. Typically the Stenner pump is set to 50%, and so will use 20 gallons of solution for every 24 hours the well pump has been running.