Hi Gerry and Brett,
The chlorinator/iron filter system is working very well. Thanks for your expertise and help in setting it up.
Attached are a few pictures of the system.
I didn't realize how essential the chlorine was to fix our water problems. I set just the chlorinator up first, and adjusted it for 0.5 ppm free chlorine residual. The water remained clear rather than turning rusty colored after exposure to air for a half hour, and the rapid staining of all plumbing fixtures stopped immediately. That saved a lot of cleaning time! The water still tasted like iron though. Then hooking up the iron filter took care of that.
We're very happy with the system, and really appreciate your help.
Best wishes,
Chaga
PFAS Treatment for Drinking Water is needed in many areas of the U.S. and Canada.…
Chlorinated City Water Can be Tough on Your Skin Living in the city has its…
Do you have Well Water Hair Damage? Embarking on a journey through the complexities of…
Earlier this week a customer wrote to us asking for a whole-house filter and a…
Understanding Your Well Water Test Report How to read your water test report? Since you…
Rotten-egg smell in your well water? Fix well water that smells bad: 1. Aerate water…
