Free Fast Shipping
In the Continental U.S.
Water Experts
WQA Certified Technicians
3-Stage Whole House Filter System 20 inch Big Blue Wall Mount
Frequently Bought Together
Code: F1012440
$32.00Code: F1012400
$30.00Code: F1012520
$49.00Code: F1012930
$119.00Price Total
Description
Description
3-Stage Whole House Filter, 20" Big Blue, Wall Mount
This three-stage 20" Big Blue system filters all the water coming into your home. The first stage is a clear housing, so you can see the dirt it catches; the second and third stages are blue housings. You choose the cartridge set for your water.
Choose Your Cartridges
- Pleated 50 micron, 50/5 micron sediment, GAC carbon: two sediment stages, then refillable coconut shell carbon for chlorine taste and odor. Best for city water with some sediment.
- Pleated 50 micron, 50/5 micron sediment, PFAS carbon block: two sediment stages, then a carbon block that reduces PFAS (PFOA and PFOS) plus chlorine taste and odor.
- 50/5 micron sediment, GAC carbon, PFAS carbon block: sediment, then GAC carbon to take the chlorine load, then the PFAS block. Best when you want both chlorine and PFAS reduction.
What's Included
- 1 clear 4.5" x 20" housing (stage 1) and 2 blue 4.5" x 20" housings (stages 2 and 3), 1" NPT brass threads, pressure-relief buttons
- 3-stage wall mounting bracket with screws
- 2 stainless steel pipe nipples, 1" x 2", to join the housings
- 3 cartridges, 4.5" x 20", in the set you choose, one per stage
- 3 housing wrenches (one comes with each housing) and Teflon tape
Specifications
| Flow rate | 4 GPM recommended, set by the carbon or PFAS stage |
| Connections | 1" NPT female, brass thread, inlet and outlet |
| Cartridge size | 4.5" x 20" (Big Blue), every stage |
| Housings | Big Clear first stage and Big Blue stages: same size, threads and ratings |
| Pressure | 90 psi maximum |
| Temperature | 41-100°F, cold water only |
| Stage order | Water enters on the right: clear housing (stage 1), then the two blue housings |
| Mounting | Wall, 3-stage bracket; housings joined by 1" stainless nipples |
| Best for | Homes with 1 to 2 bathrooms |
Start-Up: Flush the Carbon First
If your cartridges include the GAC carbon cartridge, flush it before you use the water: run water through the system until it runs clear (the first water carries harmless carbon fines). With the 50/5 sediment, GAC carbon, PFAS carbon block option, install the PFAS block only after the GAC is flushed, so carbon fines do not load the block.
Replacement Cartridges
Pleated 50 micron 4.5" x 20" (F1012440); CWS dual grade 50/5 micron 4.5" x 20" (F1012400); refillable activated carbon 4.5" x 20" (F1012520, refill with M1001470); PFAS carbon block 4.5" x 20" (F1012930, about 12,800 gallons). Change sediment cartridges about every 3 to 6 months, refill or replace the carbon about every 6 months, and replace the PFAS block at its gallon rating.
Installation
Install on the main water line where it enters the home, after the main shutoff and before the water heater and any water softener. Water enters on the right side: the clear housing is the first stage. Keep the clear housing out of direct sunlight and away from freezing. Add shutoff valves and a bypass so you can change cartridges without shutting off the whole house. If your water pressure is over 80 psi, install a pressure regulator first.
Questions? Call our water experts at 888-600-5426.
Request a Call




