These Pleated Filter Cartridges offer two pleated layers of our patented
electropositively- charged filter media, providing a unique combination of high
efficiency, capacity, flow rate for bacteria and particulate adsorption while maintaining a
low pressure drop.
of a thermally-bonded blend of microglas fibers & cellulose infused with
nanoalumina fibers in a non-woven ma-trix creates an electropositively-charged
depth filter media. These filters offer an ultra-high level of filtration efficiency because of the extra bed-depth of
the two layers of electropositive filter media.
Completely safe and certified for drinking water.
Removes turbidity down to less than 0.01 NTUs. Perfect to remove color and tannins from water for point of use, or small homes or cottages.
Bacteriastatic, no bacteria can grow on the filters causing tastes and odors.
5 Micron Pre-Filter recommended ahead of the filter.
NanoCeram filters utilize a highly electropositive filter media that rapidly adsorbs particles, no matter how small. As a result, each NanoCeram electropositive water filter has a high capacity for particles as large as tens of microns or as small as a few nanometers (submicron and colloidal).
The nature of electropositive attraction is such that even with an average pore size of 2 to 3 microns the NanoCeram Filter Cartridge exhibits an Absolute Rating of 0.2 microns typically associated with ultraporous membranes. Yet NanoCeram flow rates are hundreds of times greater than such membranes.
How Long Does the Cartridge Last?
When you notice pressure loss through the filter (the water begins to run more slowly) it is time to change it. Depending on water usage and the amount of sediment in the water, this can be anywhere from 4 to 18 months. To extend life of the Nano-Ceram, we recommend the use a 5 micron pre-filter ahead of the Nano-Ceram.