Yesterday we were asked a good question in a comment on a blog post from back in March about disinfecting water with hydrogen peroxide. Erik asked, “What would the recommended dosage of H2O2 be per volume unit of water?” You should generally inject 1.0 ppm of hydrogen peroxide for each part per million of iron … Continue reading Hydrogen Peroxide in Well Water How Much to Inject
I wanted to wait at least a month before responding, so I could better see how the system was working. I am pleased to say that I believe the system is working well. I used to have to take an iron removal spray called ” the works” to my fiberglass shower every four … Continue reading Shower Stays Clean – Pro Ox System is Working Well
Here is a picture of my installed system. My flow valve is installed after my outside water pipes so I don’t use peroxide while watering outside or using water outside of the house. The small tank to the left of the water pressure tank is the hydrogen peroxide solution tank. I covered it with an … Continue reading Water Tastes Great – Very Pleased So Far
If you've just drilled a new well or moved onto a property with a new well, you've likely noticed mud and sediment in your water. Don't worry, it's very common for water from a new well to contain a lot of drilling mud and sediment at first. One reader recently asked which system would be … Continue reading Well Water Treatment
Earlier this week, one of our customers wrote to us to ask about the difference between fine mesh and standard resin for removing iron with a water softener. Generally, we recommend an iron filter to remove iron, but in certain cases, a water softener will do the trick, too. That is if your water's pH … Continue reading What’s the Difference Between Fine Mesh Resin and Standard Resin When Removing Iron?