Filter Cartridge Pleated 50 Micron 4.5" x 10"
Pleated Filter Cartridge
- Filtration down to 50 Microns!
- Washable and reusable cartridge keeps maintenance costs low. For best results, direct spray into pleats to dislodge sediment or brush off filter cake from the surface of the media after it has dried.
- Pleated filter cartridges outperform wound, spun, melt blown, resin bonded and other "depth" type filter elements because our cartridges are pleated to provide increased surface area and longer life.
- Lower pressure drop is another significant advantage of using pleated cartridges, which allows for increased flow rates and the use of smaller filter housing to reduce capital equipment costs.
- Our filter media is dramatically thicker than other products. For this reason,cartridges provide "depth" filtration for greater sediment removal.
- Filters down to 50 Microns!
- Flow Rate: 10 gallon per minute
- 100% cellulose-free filter media
- PVC end caps
- Polypropylene center tubes
- Operating temperature: 40F - 140F (4.4C - 60C)
- Maximum PSI recommended 100 PSI
- Filter Cartridge Length: 10"
- Filter Cartridge Diameter: 41⁄2"
Weight: 1.00 lbs.
Manufacturer #: F1012430