Flow Switch: Thomas Indoor 1" Pre-Wired Straight 110V 0.5 GPM
Pre-Wired 110v Flow Switch Makes It Easy to Automatically Control Chlorination / Peroxide System
Simply plug flow switch cord into any 110v wall outlet. Then plug your chlorinator or peroxide chemical feed pump into the flow switch receptacle (outlet). When water flows, your pump will turn on.
What is the difference between the wired and non pre-wired flow switches?
The pre-wired flow switches come with a cord and a plug. You plug the flow switch into a wall socket. Then you plug a metering pump or other device into the flow switch, which has its own receptacle. When there is flow the receptacle energizes and turns on the pump etc. The non pre-wired ones, requires wiring.
Model 2651 UL Certified Liquid Flow Switch
This model is 1" PVC slip socket weld, for gluing with PVC glue.
Suggested installation: Horizontal ports with lead wires up, set point may slightly change otherwise
Not for vertical installation
Pre-Wired Indoor w/ one plug switch
Leads are 24" 18 AWG PVC,
Pressure Range: -14.7 to 150 PSI
Operating Temperature -20F to 140F
Weight: 1.00 lbs.
1 Year Manufacturers Warranty
Manufacturer: Thomas Products LTD
Manufacturer #: 47850