J-PRO-38 Inlet Top + Outlet Bottom Fittings Set PVDF

Description

J-PRO-38 Inlet Top + Outlet Bottom Fittings Set, PVDF

Replacement inlet and outlet fitting set for the J-PRO-38 chemical metering pump. Includes both the top inlet fitting and the bottom outlet fitting.

Made from PVDF, so this set handles chlorine, hydrogen peroxide, soda ash and other chemicals used in well water treatment. PVDF resists chemical attack far better than standard PVC, which is why it's the right choice for continuous chlorination and peroxide feed.

Fittings are a normal wear item on a metering pump. Over time they harden and the seats wear, which shows up as leaking around the tubing connection, loss of prime, or the pump running without moving chemical. If you've replaced the diaphragm or check valves and the pump still won't hold prime, worn inlet and outlet fittings are usually the reason.

Sold as a set — replacing both at once is worth doing, since they wear at the same rate.

Fits: J-PRO-38 metering pumps [confirm whether J-PRO-22 too]
Material: PVDF
Connection: 3/8" tubing
Includes: inlet top fitting, outlet bottom fitting