Stainless Steel Automatic Drain and Flush Valve

• Heavy duty Motorized Ball Valve with Easy to Set Timer Control
• Great for use as a drain down valve for Sand Separators and Rusco Spin-Down Filters
• NOTE: no plug provided.  Has 2 leads and works for either 110v and 220v. 
• Hard wire or use your own plug of choice.

Specifications

• Stainless steel 304
• Pipe size: choose 1/2" NPT or 3/4" NPT (female pipe thread)
• Estimated life: 70,000 times open and close
• Power requirements: 110v or 220v 50/60 hz. Uses 500ma (0.5 amp)
• Dual Voltage. No cord supplied, hard wire, or attach a power cord to it
• Can be wired in to 220v well circuit, uses only 0.5 amps.
• Works on both 110 and 220v right out of the box, no external power traormer required
• Open/Close time: 7 seconds
• Maximum pressure: 1.0 MPa (145 PSI)
• Environmental temperature: -15C to 50C (5F to 120F)
• Liquid temperature: 2C - 90C (35F to 190F)
• Non-corrosive high-tech material construction
• ANSI Certified for drinking water
• Rated for IP67, NEMA 6 rated (totally protected against dust, water)
• Time control range: Valve can stay Open OR Closed from 00:00:00 to 99 hours, 59 minutes, 59 seconds. So for example the timer could be set to turn on several times a day for 10 seconds, or whatever is desired, within that time range.
• Complete instructions included with valve.
• Power backup built-in.  Saves your timer settings, even during a power outage.  Saves current clock time up to 7 days, other parameters up to 30 days.