Filter Cartridge Omnipure Inline Carbon GAC-TCR

Specifications:

Omnipure In-Line Carbon Filter Cartridge GAC-TCR; 1/4" pipe thread fittings each end.
Works great for filters for refrigerators or as a post filter on RO systems.
No fittings included, requires 1/4" pipe thread x 1/4" or 3/8" tubing fitting.

Flow Rate	0.5 gpm
Maximum Operating Pressure	125 psig
Operating Temperature	2 to 38C35 to 100F
Rated Capacity	1,500 gal/1 Year
Reduction Claim	Chlorine, taste, color, and odor reduction
Standards	ANSI (American National Standards Institute) (National Sanitation Foundation)
Uses	Icemakers, Refrigerators, Under-the-counter, Drinking fountains, Beverage Equipment, R.O. Systems, and in Conjunction with Commercial Purification Systems.

Tested and Certified by International against ANSI / Standard 42 for Taste and Odor Reduction and Chlorine Reductions Class I.

Note flow direction of filter.
For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with PTFE tape before installation. Install PTFE taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
Replace cartridge when rated capacity (1,500 gallons/1 year) is reached, or when flow becomes too slow.
Install in compliance with state and local laws and regulations.

Weight: 2.00 lbs

Manufacturer: Omnipure

Manufacturer #: CL10ROT33-B