Phosphate System Including One Phosphate Cartridge 3/4"
- Protect Water Heaters & Piping from hard water and scale build-up.
- Prevents Corrosion. Helps to Removes Existing Scale in Pipes and Water Heaters.
- NOTE: if youare on well water, check your water's pH. If pH is under 7 we recommend calcite neutralizer first,and phosphate filter after.
- These filters come with one F1009700 Poly Guard Phosphate Crystal Cartridge 10" phosphate cartridge.
- The cartridge is a by-pass feeder meaning that some of the water flows around the cartridge so as not to slow down flow or reduce pressure.
- The cartridge contains foodgrade hexametaphosphate crystals that dissolve slowly in water to inhibit scale and rust build-up.
- The housing is a Pentek #10 housing with 3/4in. inlet and outlet and comes with a mounting bracket screws and a filter wrench.
Includes Poly Guard Cartridge - Prevents Damage from Hard Water and Rust
Poly Guard Phosphate Cartridge fits standard 10" filter housings. Looking for a solution to hard water rust? Pro Poly Guard slowly releases food grade (Crystals) into the water supply, protecting plumbing and water using appliances from corrosion and hard water rust and extending the life of plumbing and appliances by coating the interior walls.
This coating of the plumbing also reduces the leaching of copper and lead into drinking water. Poly Guard sequesters hard water (maximum 12 grains per gallon hardness), reducing scale build up, and sequesters low levels of iron (maximum 1 part per million iron), reducing hard water rust staining.
The Poly Guard Cartridge will treat approximately 30,000 gallons of water depending on water conditions. Temperature range 40-125 F (4.4-37.8 C). This product is Certified to meet /ANSI Standard 60 for drinking water additives.
SCALE & RUST PREVENTER
PREVENT HARD WATER & RUST
Weight: 11.00 lbs.
Manufacturer: Pentek Filtration
Manufacturer #: PS000060