Ships in 10 to 12 weeks. Need it sooner? Call us at 888-600-5426 and ask about faster shipping.

Commercial Iron Filter for Well Water Pro-OX Lite 7500-C 2" Pipe Size

• High iron needs careful design. Send us your water test, and we'll build the right system around your water and how you use it. We recommend this system for up to 5 ppm iron. Higher removal rates are possible depending on water chemistry.
• Customers report many years of service, and the media is easy to replace.
• The media works down to pH 6.2; we recommend pH 7.0 or higher for best results.
• Pro-OX Lite: lightweight manganese dioxide filter media (12.5% MnO2), made in Texas with NSF/ANSI 61-certified Pyrolox Advantage media.
• Optional: chlorine injection ahead of the filter. Considering hydrogen peroxide for sulfur odor? We recommend a contact tank after the peroxide injection, then a catalytic carbon filter ahead of the iron filter to remove leftover peroxide.

• Cleaner water throughout your property: Helps remove iron, rust, manganese, hydrogen sulfide odors and sediment from well water when properly sized and matched to your water chemistry.
• High-flow commercial connections: 2" inlet, outlet and backwash connections accommodate commercial filtration applications. Actual system flow depends on water pressure, piping, media and treatment requirements.
• Advanced Pro-OX Lite media: Engineered filter media with a durable, high-purity manganese dioxide coating on a silica sand substrate. Its porous surface supports oxidation and filtration of iron and manganese.
• Lighter than conventional solid manganese dioxide media: Pro-OX Lite reduces media weight and backwash demand compared with traditional heavy Pro-OX media.
• Automatic cleaning: The 7500-C control valve periodically backwashes the media to discharge accumulated contaminants, then rinses the bed before returning to service.
• Treatment matched to your water: Removal performance depends on pH, dissolved oxygen, contaminant levels and contact time. Aeration or chlorine injection may be required ahead of the filter.
• No potassium permanganate required: Pro-OX Lite operates catalytically with adequate dissolved oxygen or a suitable oxidant. Chlorine may be used when additional oxidation or media regeneration is needed.
• Durable commercial control: The heavy-duty ceramic disc valve features adjustable backwash and rinse cycles for application-specific setup.
• Flexible system integration: Interlock and signal-output capabilities support coordination with compatible external controls and other treatment equipment.
• Built for dependable operation: Includes a corrosion-resistant filter tank, support gravel and commercial backwash control valve.

Backwash and System Sizing

• Pro-OX Lite requires approximately 12–18 GPM per square foot of tank area during backwash, targeting 20–30% media bed expansion.
• A 24" diameter tank requires approximately 38–57 GPM across this backwash range. A 44 GPM supply provides approximately 14 GPM per square foot; suitability must be confirmed for the actual water temperature and bed expansion.
• The water supply must maintain the required backwash flow through the complete system, including the valve, media, distributors and drain piping.
• Provide adequate freeboard for media expansion. Backwash capacity is separate from the recommended service flow for contaminant removal.
• Contact our water treatment specialists with your water test results, available flow and pressure so we can confirm the correct system configuration.

Includes

• Pro-OX Lite iron and manganese filter media
• Filter support gravel
• Heavy-duty 7500-C commercial automatic backwash control valve
• Filter tank
• Pipe connectors