Pulse Water Meter w/ Reed Switch 1-1/2"
|Flow Rate Comparison Chart in Gallons Per Minute|
|Model||Minimum Flow Rate||Maximum Flow Rate|
Specifications:Clean Water Systems Lead-Free Pulse Water Meter with Reed Switch 1-1/2" NPT is designed for aggressive water such as low pH, reverse osmosis and de-ionized. Also works well on well water where conditions can be demanding.
Meter Housing: Engineered reinforced plastic (nylon).
Connections: Plastic threaded connectionswith unions for 1-1/2" NPT
Reed Switch: 1 pulse per gallon
Flow Rate: 1 to 50 gallons per minute recommended (higher flow rates possible)
Pressure Rating: Maximum 100 PSI.
Temperature Range: 35 - 122 degrees F. Protect the meter from freezing.
pH Level Range: 6.0 - 8.0
Accuracy: +/- 1.5% of maximum flow when operating between minimum and maximum flow range.
Register Options: U.S. Gallons
NOTE: Water meter must be installed horizontally. These meters cannot be installed vertically.
Pressure Drop 1 - 15 PSI depending on flow rate
Weight: 3.00 lbs.
Manufacturer #: M7001440