Free Fast Shipping
In the Continental U.S.
Water Experts
WQA Certified Technicians
2-Stage Whole House Sediment Filter System 20 inch Big Blue
Frequently Bought Together
Code: F1012440
$32.00Code: F1012400
$30.00Code: F1012420
$38.00Code: T8000690
$15.00Price Total
Description
Description
2-Stage Whole House Sediment Filter, 20" Big Blue
This two-stage 20" Big Blue system removes sand, silt, rust and scale from all the water coming into your home. Stage 1 is a clear housing with a pleated 50 micron cartridge that takes the coarse dirt, so you can see when it needs changing. Stage 2 is a blue housing with a dual grade cartridge that catches the fine particles. Choose 50/5 micron (standard) or 25/1 micron (finer) for stage 2.
What It Reduces
- Sand, silt, rust and scale down to 5 micron (50/5 option) or 1 micron (25/1 option)
- Cloudiness from fine sediment
What it does not remove: chlorine, PFAS, bacteria, hardness, dissolved iron or odors. Add a carbon stage for chlorine taste and odor (see our 3-stage systems).
What's Included
- Clear 4.5" x 20" housing (stage 1) and blue 4.5" x 20" housing (stage 2), 1" NPT brass threads, pressure-relief buttons
- 2-stage wall mounting bracket with screws
- 1" x 2" stainless steel pipe nipple to join the two housings
- 1 pleated 50 micron cartridge 4.5" x 20" (F1012440), stage 1
- 1 dual grade cartridge 4.5" x 20", stage 2: 50/5 micron (F1012400) or 25/1 micron (F1012420), your choice
- 2 housing wrenches (one comes with each housing) and Teflon tape
Specifications
| Flow rate | Up to 20 GPM (each cartridge is rated 20 GPM) |
| Connections | 1" NPT female, brass thread, inlet and outlet |
| Cartridge size | 4.5" x 20" (Big Blue), every stage |
| Housings | Big Clear first stage and Big Blue stages: same size, threads and ratings |
| Pressure | 90 psi maximum |
| Temperature | 41-100°F, cold water only |
| Stage 1 | Pleated 50 micron, clear housing (water enters on the right) |
| Stage 2 | Dual grade 50/5 or 25/1 micron, blue housing |
| Mounting | Wall, 2-stage bracket; housings joined by a 1" stainless nipple |
| Best for | Well water or city water with sand, silt or rust |
How Long Do the Cartridges Last?
Change the cartridges when the clear bowl looks dirty or the water pressure drops, usually every 3 to 6 months. Replacements: pleated 50 micron (F1012440), dual grade 50/5 micron (F1012400), dual grade 25/1 micron (F1012420).
Installation
Install on the main water line where it enters the home, after the main shutoff and before the water heater and any water softener. Water enters on the right side: the clear housing is the first stage. Keep the clear housing out of direct sunlight and away from freezing. Add shutoff valves and a bypass so you can change cartridges without shutting off the whole house. If your water pressure is over 80 psi, install a pressure regulator first.
Questions? Call our water experts at 888-600-5426.
Request a Call




