Hydrogen Peroxide Well Water System
- Eliminate odors with hydrogen peroxide!
- Adds natural oxygen. No chlorine or chemical residuals.
- Works over a wide range of water flow rates for most home water wells.
- Choose standard system for injecting before pressure tank, or Proportional Flow system.
- If your well has strong odor for best results use peroxide injection with one of our Catalytic Carbon Backwash Filters.
- CARBON BACKWASH FILTERS
Features and Benefits:
- J-PRO-22 Versatile Peroxide System Works for a Wide Range of Conditions and Wells.
- Eliminate odors with hydrogen peroxide! Adds natural oxygen. No chlorine or chemical residuals.
- Works over a wide range of water flow rates for most home water wells.
- Choose standard system for injecting before pressure tank, or Proportional Flow system for installing anywhere after pressure tank or for variable speed constant pressure system.
- Good for well water flow rates from 1 to 50 Gallons Per Minute (1 - 50 GPM)
- Pumps 0.1 to 22 gallons of solution per day
- Works for line pressures up to 110 PSI
- Dual Voltage 110 to 230 volts 50/60hz
- Dimensions: 15 gallon model: 14.5" wide x 24", height including pump is 35". 35 gallon model: 18" wide x 33", height including pump is 44".
- Digital speed adjustment makes adjusting the pump fast and easy for incredibly accurate injection.
- De-gassing vent built-in makes the pump great for peroxide use.
- Unlike Stenner-style peristaltic pumps: no pump tube failures, no rollers to go bad, needs less service, and good for continuous duty.
- NOTE: Peroxide injection works best if you filter water after with Carbon Backwash Filters using catalytic carbon option.
- CARBON BACKWASH FILTERS
NOTE: Contact Tank is Optional. A contact tank offers a way for sediment and sand to be drained off, as well as providing time for the peroxide to oxidize higher levels of odor. For most residential applications with mild odor and taste issues, the contact is not needed.
The peroxide pump can be controlled automatically by wiring it to pressure switch. It will then turn on and off with the pressure switch. You can also use a pre-wired flow switch so when there is flow of water the peroxide pump is activated.
When using either the flow switch or direct wiring to the pressure switch, install the injection check valve before pressure tank for consistent dosing. If you want to install injection check valve any location in the piping after the pressure tank, use the proportional peroxide injection with flow sensor so peroxide dose is controlled by flow of water.
