Flow Switch PVC 1" Pre-Wired 220V

Flow Switch PVC 1" Pre-Wired 220V

Code: X1000480 List Price: $419.00 Your Price: Shipping Weight: 2.00 lbs. Manufacturer: Grid Controls Manufacturer#: 57-F4-3120-010
Not Yet Rated | Write the First Review

Questions? Get a Fast Answer to your water treatment problems, click here!


  • Reliable Flow Operation Model M310;Will turn on when water flows at 1.0 GPM, but can be adjusted to higher initial flow set points
  • 10 AMP Will Switch Motors Up to 1 HP, 125 VAC & 2 HP, 250 VAC
  • Prewired! Plug into any 220v wall outlet, then plug 220V metering pump into flow switch. Fast. Easy!
  • Standard 1" PVC Slip Fittings
  • 5 Amp switch rating, works great for metering pumps, solenoid valves and small pumps
  • Line Pressure to 100 PSI
  • Temperature to 110F Continuous
  • Wetted Surfaces - PVC, Polypropylene, Buna N, or EP. No Metal to Calcify.

• These versatile Flow Controller switches may be used to establish flow/no flow control of metering pumps in various applications.
• These pre-wired self-contained flow switches were specifically designed for homeowners and others to make it quick and easy to install metering pumps.
• Just plug the cord into any 115v outlet install the flow switch in the piping and plug the metering pump into the pre-wired receptacle.
• As soon as there is flow of water the metering pump will turn on.
• Turns feed pump on at 1.0 GPM with a max. operating pressure of 150 PSIG.

A Few of Our Valued Commercial/Industrial Customers

  • Clean Water Systems & Stores, Inc., Water Treatment Equipment,Service & Supplies, Santa Cruz, CA